EK-Furious Vardar EVO is an industrial grade high-static pressure computer cooling fan, designed and built primarily for highest-performance computer liquid cooling systems.
EK-Vardar EVO is a new and upgraded version of the renowned EK-Vardar, the industrial grade high-static pressure computer cooling fan, designed and built primarily for highest-performance computer liquid cooling systems. Developed in-house and first introduced in 2014, EK-Vardar fans have now evolved into new EK-Vardar EVO lineup with more CFD analysis, careful motor selection, and anechoic chamber testing.
The Vardar family of cooling fans carries the name of a type of the cold northwesterly wind blowing from the mountains down to the valleys of Macedonia. It is a type of ravine wind, enhanced by a channeling effect while blowing down through the Moravia-Vardar gap, bringing cold conditions from the north to the Thessaloniki area of Greece. Most frequent during winter, it is blowing in the rear of a depression when atmospheric pressure over eastern Europe is higher than over the Aegean Sea.
The key characteristics of EK-Vardar EVO fans are:
High-static pressure / low noise profile – unlike other general-purpose computer cooling fans, the EK-Vardar EVO family of fans is built specifically for computer liquid cooling systems, namely radiator cooling. The 7 fan blade design is optimized for high-pressure operation while maintaining the low noise profile throughout the whole operation range of the fan. Vardar’s design and construction are also very suitable for high-performance air coolers or as case fans for restrictive cases with dust filters.
High-quality motor and bearing assembly – New electrical design, actively cooled motor windings and Hydro-Dynamic bearing with 50.000 hours life span (MTBF) ensures uninterrupted operation for years to come. Precise Pulse Width Modulation (PWM) for fan speed adjustment allows performance on demand.
Sealed-edge fan casing – The classic, yet effective square shape of the fan casing provides optimal performance in either pull- (suction) or push (pressure) regime without hydraulic losses thus ensuring the optimal cooling capacity of your liquid cooling radiators. The classic shape of the fan frame also allows easy cable routing while grouping more fans on one radiator.
Timeless design – the EK-Vardar EVO fan fits subtly into any liquid cooling computer without drawing too much attention. Delivered in all black color scheme it blends perfectly with a sleek and minimalist looking EK-CoolStream liquid cooling radiator.
Mechanical and electrical specifications:
– Maximum speed: 3000 RPM (+/- 10%)
– Rated Voltage: 12V DC
– Power Draw: 5.64W
– PWM Duty Cycle: 40-100%
– Connector: 4-pin PWM header
– Shaft bearing: Hydro-Dynamic bearing
– Bearing durability: 50.000 hrs @ 40°C (MTBF)
– Dimensions: 120 x 120 x 25 mm
– Max Air Flow: 107 CFM = 181 m³/h
– Static Pressure: 5.81mm H²O = 57 Pa
– Sleeved cable length: 300 mm
– Noise Level: 42 dBA
The scope of delivery:
– EK-Vardar EVO series fan
– self-tapping screws (4 pcs)
Designed and engineered by EK Water Blocks in Slovenia – Europe
Made in China
- The minimal rotation speed of the fan might vary from motherboard to motherboard model and even source PWM header.
- For best results, EK recommends using the CPU_FAN header as the PWM signal source for controlling the fan.
- The radiator is just for showcase and it is not included!